2 2
7. SiS964/SiS180 Hot-Plug Utility
NOTE
1.
The Hot-Plug support is ONLY applied to Single SATA drive.
2.
SiS Hot-Plug Utility only supports Windows 2000 and XP.
3.
Usually, each power wire will provide 2 power connectors for HDDs. It
is recommended to connect SATA HDDs to different power wires to
prevent intervention.
4.
If you only hot-plug the SATA data cable without unplugging the power
cable, sometimes it will cause the Hot-Plug function fail.
5.
Time interval of the two continual hot-plug actions must be over 5 seconds.
How to use SiS964/SiS180 Hot-Plug Utility
1.
After installing the SiS RAID driver, the SiS Hot-Plug Utility will be installed
automatically. And this Hot-Plug utility will be resident in the toolbar. You
can click the right button of the mouse on the hot-plug icon and some
selection will be popup. You can click “Exit” to close this resident utility or
let it always be resident in the toolbar.
Summary of Contents for 939S56-M
Page 17: ...17 HD information...
