1 0
5.
When the RAID0 array’s configuration is finished, click the Create
button. Then a “Create Stripe RaidSet” dialog will pop up.
<Option Description>
Source:
The first selected disk.
Target:
The second selected disk.
Create Only:
Select this option will destroy all data on all
the selected disks and create a clean stripe
array without any data on it.
Source is not
Select this option will split data from source
a boot device:
disk into all the selected disks. In this option,
the source cannot be bootable.
Source is a boot
Select this option will split data from source
device:
disk into all the selected disks. In this option,
the source can be bootable.
OK:
Start the operation.
<Disk Copy Remaining Sector>:
Show the remaining splitting data.
6.
Next, you may click Cancel button to leave, or click OK button to
continue after the operation being selected. Different warning mes-
sages will pop up according to the option you select. The warning
messages are similar to JBOD array creation but the operation is
“Split data into Raid0”.
Summary of Contents for 939S56-M
Page 17: ...17 HD information...
