ASROCK Rack OCP-C612HM User Manual Download Page 79

Page: 79 / 91

OCP-C612HM

English

3.7 Boot Screen

In this section, it will display the available devices on your system for you to configure the
boot settings and the boot priority.

Boot From Onboard LAN

Use this item to enable or disable the Boot From Onboard LAN feature.

Setup Prompt Timeout

This shows the number of seconds to wait for setup activation key. 65535(0XFFFF) means
indefinite waiting.

Bootup Num-Lock

If this item is set to [On], it will automatically activate the Numeric Lock function after
boot-up.

Wait for Key

Wait for keyboard input to continure for Warning message.

Full Screen Logo

Use this item to enable or disable OEM Logo. The default value is [Enabled].

AddOn ROM Display

Use this option to adjust AddOn ROM Display. If you enable the option “Full Screen Logo”

Summary of Contents for OCP-C612HM



























































































Search results

Summary of Contents for OCP-C612HM

Reviews:

Related manuals for OCP-C612HM

Brands by name

Popular brands

ASROCK Rack OCP-C612HM, User Manual

Search results

Summary of Contents for OCP-C612HM

Reviews:

Related manuals for OCP-C612HM

Brands by name

Popular brands