20
21
English
2.5 Jumper Setup
The illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
ME Recovery Jumper
(3-pin ME_RECOVERY1)
(No. 27)
Normal Mode (Default)
ME Recovery Mode
SATA DOM Power
Jumper
(3-pin SATAPWR1)
(No. 14)
SATA DOM (SATA_4)
requires 5V power supply
Normal SATA (Default)
SATA DOM (SATA_4) does
NOT require 5V power
supply
NCSI Mode Jumper
(3-pin NCSI_SEL1)
(No. 30)
*Supports D1540D4I-2L2T only
NCSI is set LAN1 (i210)
(Default)
NCSI is set to LAN3 (X557)
CPU PECI Mode Jumper
(3-pin PECI1)
(No. 29)
CPU PECI connected to PCH CPU PECI connected to
BMC
(Default)
