ASM100 STEREO AM TRANSMITTER USER’S GUIDE
Copyright © 2009-2016 ASPiSYS
Page 4 of 10
M E N U S E Q U E N C E
Menus show a different collection of informational items.
The menu sequence is shown below. Menus do not show the actual titles. The titles below are
indicative of the function and may appear slightly different on the actual LCD.
MAIN | TEMPERATURE | FORWARD | REFLECTED | MODULATION
MAIN
Displays FRQ, FWD, REF, and Mod.
Older models (2014 or before):
Press
[
]
to turn the status to OnAir, or to re-attempt OnAir after auto-OffAir due
to excessive reflected power.
Press
[
]
to turn the status to OffAir.
Newer models (2015 or later):
Press
[
]
to increase the RF output level, or to re-attempt OnAir after auto-OffAir
due to excessive reflected power. When the maximum is reached, [H] will display on
the LCD.
Press
[
]
to decrease the RF output level. When the minimum is reached, [L] will
display on the LCD. Pressing
[
]
once again will turn the RF output off and [0]
will display on the LCD.
Note: If the OffAir setting is saved to internal memory, then every time the device
is restarted, its RF output will be disabled, unless dictated otherwise by the saved
schedule.
TEMPERATURE
Displays FRQ, Date, Time, and Temp.
Press
[
]
to increase the LCD background lighting from off (0%) to full (100%) in
10% increments.
Press
[
]
to decrease the LCD background lighting from full (100%) to off (0%) in
10% decrements.
FORWARD
Displays FRQ, Date, Time, and FWD.
Press
[
]
to turn the status to OnAir, or to re-attempt OnAir after auto-OffAir due
to excessive reflected power.
Press
[
]
to turn the status to OffAir.
Note: If the OffAir setting is saved to internal memory, then every time the device
is restarted, its RF output will be disabled, unless dictated otherwise by the saved
schedule.
REFLECTED
Displays FRQ, Date, Time, and REF.
MODULATION
Displays FRQ, Date, Time, and Mod.
S E T T I N G S M E N U
FRQ
Determines the frequency of operation. The frequency is adjustable with 1KHz step from 530KHz to
1710KHz
(special versions may have a different range)
. If a number outside the allowed range is
entered, it will be brought to the closest range limit.
Mode
Press
[
]
to toggle the mode between STEREO and MONO. C-QUAM is compatible with mono receivers so
operating at Stereo will not affect reception from typical mono receivers.
Sounding
Press
[
]
to toggle the sound option between On and Off. The sounding is used during a possible
ALERT event due to excessive reflected power.
Loudness
Press
[
]
to toggle the loudness of the sound between On and Off. Off causes a soft clicking sound
while On cause a significantly louder beeping sound.
Max FWD
