Aspiring AT260, User Manual, Page: 22 / 34

4. Parking Monitor
When you park your car somewhere,turn on parking monitor function can make
this dvr camera do recording while parking time to avoid any offend to your car
like steal or scratch. At the same time,please do not forget set G-Sensor sensitive
as high to work up this function, also must buy external power cable to do power
supply while parking.(Details about power cable please see below)
Kindly remind:All car dvr inside battery very small can last working only around
2~3 minutes if no recharging,so Parking Monitor function can only be used
together with power cable.
Operation Guide
1 . Power On/Off : Long press power button around 2~3 seconds to turn on & off.
If have TF card inside, once turn on it will enter into recording mode
automatically.
2 . Start/Stop recording : In video mode, short press OK button start recording,
short press it again, the recording will be stopped.
3 . Photo : In photo mode, short press OK button can take photo
4 . Playback : In playback mode, short press OK button can play the video.
5 . OK button : In video mode/photo mode/playback mode, short press menu
button enter into menu, short press up/down to browse, short press OK
button to confirm.
6 . Up button : In menu setting and camera switching mode, it is up function. In
standby mode, keep press up button can make motion detection on/off. In
playback mode, short press up button can play fast backward
7 . Down button : In menu setting and camera switch mode, it is down function.
In video mode, short press down button can make audio on/off.（Notice: the
setting will be saved automatically, no need to set once again the next time）
In playback mode, short press down button can play fast for ward
21