36
Using the Device
• The NX75 will detect and lock coil resistance automatically under
TC mode. To ensure accuracy when first installing a new atomizer
make sure the coil is at room temperature before attaching it to
the mod.
• To change temperature to Fahrenheit (F) or to Celsius (C), press
the “+” or “-” button all the way to pass the temperature range,
the temperature will switch over to either Celsius or Fahrenheit
automatically.
• The pre-set continuous fire time is 10 seconds, after 10 seconds
of continuous use, the mod will stop firing and the display will flash
“10s”. Users then can adjust the fire time from 5s to 15s by pressing
“+”/”-” button.
• While holding the fire button of your NX75-Z, inhale the vapor slowly
and continuously through the mouthpiece of your Atlantis EVO
clearomizer. Release the fire button while exhaling the vapor.
