35
Using the Device
• The mod will automatically turn on after installing battery. The
screen will then display user’s previous settings. After 15 seconds of
being idle the screen will turn off.
• Press the fire button 5 times within 2 seconds to either lock or
unlock the device. While the mod is locked, press the fire button for
3 seconds to turn the system off. To turn the mod back on press the
fire button 5 times rapidly.
• When the mod is on, press W button to switch mode between
VW,VV and Bypass modes. Press T button to select the mode TC
(Ni200, Ti, SS316) or TCR (M1, M2, M3 manual modes).
• Press “+” to increase wattage, voltage or temperature “-” button to
decrease. Press “+” or “-” button longer will change the value faster.
• When the mod is on press the fire button 3 times quickly to put the
mod into or out of stealth mode, while in stealth mode the mod can
still fire but the wattage or temperature settings cannot be adjusted.
• While the mod is in TC mode attaching a new atomizer the mod will
read “New Atomizer?” followed by “YES+/NO-” Select “YES+” and
the mod will read the original coil resistance. Select “NO-” and the
mod will keep its previous coil resistance settings.
Commissioning of the NX75-Z Box Mod
