Aspire EAB30-LP, Use & Care Manual

Page: 22 / 48

©2017 Hestan Commercial Corporation
20
EN
ELECTRICAL SUPPLY
(continued)
LIGHTING INSTRUCTIONS
Aspire grills feature hot-surface igniters for all U-burners, and infrared Rotisserie and Sear Burners. YOU
MUST HOLD IN THE KNOB to make the hot-surface igniters light the burners.
All burners can be manually lit should that become necessary.
CONTROL KNOB LAYOUT
Seen here is a typical layout (36” model shown, Fig. 6) for the control knobs. The rotisserie control is
always to the far left side. Control panel LED light switch is on the far right.
The lighting instructions for all burners are visible when you pull out the drip tray.
120V POWER CORD
TO GFCI OUTLET
ELECTRICAL
BOX
.75 AMP FUSE
FOR IGNITERS
.75 AMP FUSE
FOR LIGHTS
AUX. POWER
OUTLET
5A MAX. AT 120V
8-PIN CONNECTOR
(Aspire Grills)
MOUNTING
HOLES
Figure 6