17
8. TRANSPORT & STORAGE
Transportation Assembly Instructions
The
Aspire Community & Homecare Bed
is designed to be transported safely on the
ground by one person. This requires the bed to be disassembled and repositioned
on the Transportation Kit (BEA029870).
Assembly for transportation is a 4 step process.
1.
Remove Bed Head and Foot Ends from Mattress Platform after removing
Fastening hand wheels.
2. Disconnect Mattress Platform sections from each other after removing one
hand wheel from each side of the bed. It is important that one fastening hand
wheel remains in place on each side so that connector rods remain in place.
3. Insert Head and Foot ends into Transportation Bracket assembly. Support Lugs
should be both on the Head End side or both on the Foot End side of the bed to
ensure Mattress Platforms position properly.
NOTE: The Self Help Pole Holder should be on the outside of the bracket to ensure
clearance for insertion
HEAD
Self Help Pole Holder
Threads for Fastening Knobs
HEAD
Support lugs must both be located on the
same side of the bed e.g. both on Head
section side or both on Foot section
