STEP 2: Screw the bolts(E) into HB & FB. Make sure the slat bearer is in the UPPER position.
Align the bolts with the holes in the end of side rails and attach the side rails to HB & FB using flat
washer(G), lock washers(F) and nuts(H).Then use a hex wrench(I) to tighten all the nuts.
Make sure the slat bearer is
in the UPPER position.
E
F
G
H
I
Slat Bearer
Side Rail
Headboard
STEP 3: Attach the support legs with leveler to the slats.
Adjust the levelers on bottom of support legs when necessary.
Support Leg
Leveler
This End Up
Slat
For option 1:
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
Page 2/6
Left Leg
Right Leg
HB Bac
kside
B
C
A
D
STEP 1: Lay the headboard face down on a soft surface. Attach the left leg, right leg and
center support leg to headboard by using 10 bolts(A), lock washers(B) and flat washers(C)
as shown below. Completely tighten all bolts.
04-13-2022
Center Support Leg
ITEM NO: I597-400 Queen Slat HB
I597-402 Queen Rails w/ Decking
I597-403 Queen Low Profile FB
