STEP 4: Arrange slats on the slat bearers and then lay the
decking on top of the slats. Make sure the top and bottom
slats are situated underneath the pre-drilled holes as shown in
STEP 5. Remove the decking and attach slats to the slat
bearers with wood screws (J).
J
aspenhome
R
ASSEMBLY INSTRUCTIONS
MADE IN VIETNAM
ah
E
F
G
H
I
Slat Bearer
Side Rail
Headboard
STEP 3: Attach the support legs with leveler to the slats.
Adjust the levelers on bottom of support legs when necessary.
Support Leg
Leveler
This End Up
Slat
For option 1:
Make sure the slat bearer is
in the UPPER position.
STEP 2: Screw the bolts(E) into HB & FB. Make sure the slat bearer is in the UPPER position.
Align the bolts with the holes in the end of side rails and attach the side rails to HB & FB using flat
washer(G), lock washers(F) and nuts(H).Then use a hex wrench(I) to tighten all the nuts.
Page 3/7
ITEM NO: I597-404 King Slat HB
I597-406 King Rails w/ Decking
I597-410 Cal King Rails w/ Decking
I597-407 King Low Profile FB
04-13-2022
