GLD Products
Aspen Table Tennis
Item 70-0200
13
1-800-225-7593
www.gldproducts.com
STEP 4
- PLACE TABLE TOPS INTO THE FRAME
Each table top has a spring loaded handle. Pull on the handle and place two spacers (#33)
onto the rods below the plate. The spacers will prevent the handles from returning to the
start position.
1. Use two adults to lift one table top above the side supports.
2. The rubber guides at the corners of the table top are inserted into the half round
openings in the track on the side supports. Once the guides are in the tracks, the table
top will move down to the bottom.
CAUTION:
One adult must hold the table top upright. Failure to hold the table up will allow
it to fall possibly causing injury.
3. Pull up on the handle and remove the two spacers (#33). When the handle is released a
post will move into a slot in the side support on both sides.
4. An adult should continue to steady the table top. Attach the preassembled legs to the
caster supports.
33
Start guide here
