34
(Network Address Translation) in router. If the router equips “UPnP Port Forwarding”
function too, this device will ask the router to open the “External HTTP Port” and
“External RTSP Port” for this device automatically. Therefore, you don’t need to
configure the Port Forwarding manually.
Note: Not all routers equip “UPnP Port Forwarding” function. The device will report
whether this function is successful after click
[Apply]
button.
Multicast Setting
Multicast addressing is a network technology for the delivery of streaming to a group
of destinations simultaneously using the most efficient strategy to deliver the
messages over each link of the network only once, creating copies only when the links
to the multiple destinations split. To implement the Multicast, a switch or router that
supports Multicast function is necessary in the network.
If your network supports Multicast, you can configure the device to enable this
function by setup the following:
IP Address:
This is the multicast group address the streaming should be sent to. You
should configure each recipient with the same multicast group address and receive
the streaming from this address. The range is 224.3.1.0 ~ 239.255.255.255
Port:
The multicast port. The range is 1 ~ 65535
TTL:
Time-To-Live (TTL) for Multicast Packets. This value decides how "far" from a
sending host a given multicast packet should be forwarded.
After set up, click [Apply] to save the settings.
Summary of Contents for CAM624M
