8
2. IP Search searches all the network devices which connect to the intranet and lists
on the window. Click [Search] button to search again.
3. From the list, select the device with the MAC Address that corresponds to the
device that is to be configured.
4. Click one of the network devices, the network configuration of this device will show
on the bottom.
5. After filling in the IP Address, Subnet Mask, Gateway and the others, click [Set]
button to complete the configuration settings and save into the remote device.
6. You can assign a name to idetify the camera. Type the name in “Device Name” field,
click [Save] and then click [Search] button, the name will be displayed in the list.
7. Wait for 1 minute to let camera update the settings, and then click [Search] button
again to re-search the network devices. Click the network device listed on the
window and click [Open Web] button. It will open an IE browser and connect to this
device directly.
Summary of Contents for CAM413
Page 1: ...Network Camera CAM413 CAM413W User s Manual Version 3 1 Date 5 22 2008...
Page 11: ...10 3 4 5 When popup the following dialogue box click Yes...
Page 27: ...26 UPnP Enable or disable the UPnP protocol After set up click Apply to save the settings...
Page 31: ...30 D Event Handling Event Setting CAM413 413W supports multiple event settings Event...
