Page
10
of
38
3.
Plug the PlugLink 500 Wireless “N” Adapter into a wall outlet near the
wireless computer that you want to connect.
Figure 5-2: Plugging the PL9571-WAP vertically into a wall outlet.
4.
Wait a few seconds and the top three LEDs on the PlugLink 500 Wireless “N”
Adapter will light up.
5.
From your computer scan your Wireless Network Connections to look for
your PlugLink 500 Wireless “N” Adapter’s network name (SSID). The default
name (SSID) of the PlugLink 500 Wireless “N” Adapter is Asoka. You will be
prompted for your “Encryption Key”. The default Encryption Key is the last
10 digits of the serial number. The serial number is printed on the PL9571
label.
If you changed the default network name (SSID), be sure to
use the correct network name (SSID) you set in the PlugLink
500 Wireless “N” Adapter.
Wireless security is enabled by default on the PL9571-WAP. For
more information about changing the PL9571-WAP security
settings, see the subsection in Chapter 10 entitled Wireless
Security.
6.
Verify wireless connectivity by connecting to the Internet or log into the
PL9571-WAP from a computer with a wireless adapter.
