Asoka AV 9560 User Manual Download Page 4

Page: 4 / 43

Contact Information

For more information about the PlugLink AV 9560 Wireless Adapter or any of
Asoka’s other leading-edge solutions, please contact us using any of the following
methods:

• Voice calls: (408) 550-8167 - We welcome your calls Monday through Friday, from

9:00 am to 5:00 pm Pacific Time. Voice mail is available during non-business

hours.

• Email: If you prefer, you can send information requests to our e-mail address:

[email protected]

• Web site: Our Web site contains valuable information about our products,

solutions, and services. We encourage you to visit us at

http://www.asokatech.com

Customer Service

Available from: Monday through Friday, from 9:00 am to 5:00 pm Pacific Time, by
calling (408) 550-8167 or through email at

[email protected]

Technical Support

Technical support is available Monday through Friday, from 8:00 am to 5:00 pm
Pacific Time, by calling (408) 550-8173 or through email at
tech

[email protected]

Please provide the following information about the problem:

• Product name and model.

• System configuration, including a description of the devices connected to your

PlugLink AV 9560 Wireless Adapter.

• The circumstances surrounding the error or failure.

• A detailed description of the problem and what has been done to try to solve it.

Summary of Contents for AV 9560












































Search results

Summary of Contents for AV 9560

Reviews:

Related manuals for AV 9560

Brands by name

Popular brands

Asoka AV 9560, User Manual

Search results

Summary of Contents for AV 9560

Reviews:

Related manuals for AV 9560

Brands by name

Popular brands