FIG. 9
Before removing the scale filter
“h“
, first
remove the kettle from the power base and
allow to cool down. Never remove the
scale filter while the kettle is still hot or still
full of water.
Simply pull the scale filter upwards from
the spout
(9)
.
When replacing the filter, ensure that the
scale filter is located properly in its guide
(9)
.
Press the scale filter down fully into the
spout.
Note
Never
leave the scale filter loose in the
kettle.
Wipe out the kettle and power base with
a damp cloth and rinse out the inside of
the kettle with water. Remove stubborn
stains with washing up liquid.
To get the best results at all times, make a
regular check to see if there are particles
of scale in the scale filter. Flush out the
scale filter
“h“
under running water and
use a soft brush if necessary (no metal).
The kettle must be descaled regularly.
At the latest, the kettle should be descaled
when the time required to boil water is
markedly longer or if it cuts out too soon
while heating the water.
Method:
Fill the kettle up the maximum filling level.
Close the lid. The safety lid must click
into place. Connect the power base to
the mains and put the kettle on the
power base.
Switch on the kettle. The kettle switches off
automatically once it has boiled the water.
Use any standard descaler (follow the
instructions for use given by the manufac-
turer).
Allow the de-scaling agent to take effect
for at least 30 minutes. Afterwards, rinse
out the appliance several times with clean
water and then boil again with clean
water which should then be poured away.
Repeat the process if the kettle is heavily
scaled.
Packaging materials and appliance and
accessories are made of recyclable mate-
rials.
Separation of the remaining waste mate-
rial into different types facilitates the
recycling of valuable raw materials.
Environmental protection
De-scaling
Cleaning and maintenance
Remove scale filter
Remove the kettle from the
power base and allow it to
cool down each time before
cleaning. Disconnect the plug
from the mains.
Never immerse the appliance
or the power base in water and
never use highly corro-sive or
abrasive cleaning agents.
14
