RRM02 - Product Manual
Issue: 02 complete, approved
Page 59 of 68
11 Safety
and
Precautions
11.1 Environmental
The temperature and humidity ranges shown in
the specifications for this product must not be
exceeded.
This equipment must not be installed in an area
that is subject to a corrosive atmosphere.
When installed in accordance to the instructions in
this document, the unit provides IP65 ingress
protection.
11.2 Electrical
Safety
Always replace blown fuses in the supply to this
equipment with the correct type and rating.
Ensure power supply cabling is adequately rated.
11.3 ESD
Precautions
This product contains static-sensitive devices.
Observe ESD precautions when handling this
product.
11.4 EMC
In the close proximity of some radio frequency
transmitters, the signal to noise ratio of this
product may be reduced. If this occurs, re-location
of the equipment or the signal cables is
recommended.
11.5
Unpacking and Handling
The equipment should be unpacked and
inspected immediately on receipt. If damage has
occurred please advise your carrier or supplier.
It is advisable to retain the original equipment
packing in the event that the equipment ever
needs returning for service.
Ensure that the name and address of the
Authorised Distributor from whom you purchased
the unit is recorded on the “
Service and Warranty
”
page of this manual for future reference.
Advice on packing the product for return can be
provided by Application Solutions (Safety and
Security) Limited.
Summary of Contents for RRM02
Page 68: ......
