Configuring the Unit via its Web Interface
Function Bar
ENC 1201
Version 1.0 Page
18
4.2.2 Right Part of the Function Bar
Factory Reset
This function allows you to restore the ENC 1201’s factory settings (also called “initializ-
ing”).
Careful:
• Restoring the factory settings overwrites the configuration stored inside the unit. It is recom-
mended to back up the ENC 1201’s current configuration settings to your computer (see “Down-
load Config”, p. 17) before initializing it.
1.
Click [Factory Reset] to open the following window:
2.
Click [OK] to confirm this command (or [Cancel] if you don’t want to proceed).
If you confirm, the ENC 1201 reboots and restores the factory settings.
Reboot
If, for some reason, the ENC 1201 needs to be restarted, click [Reboot]. If you do, the fol-
lowing confirmation dialog is displayed:
Click [OK] to confirm this command (or [Cancel] if you don’t want to proceed).
