17
CHBL: (Chakra Balance)
This is a user friendly program and very easy to operate. No physical connection to the body
is required. Your body simply receives frequencies being generated by the Magnacoil which
sits under or next to the body. This is a great relaxing and balancing frequency range for our 7
main Chakra areas.
Chakra Balance (Fig 19) will run 7 programs / frequencies in cycle of 5 minutes for each fre-
quency. Total run time will be 10 cycles. Outputs equal pulse width bi-polarity square wave-
form and output intensity can be adjusted during program run. Press UP (7) / DOWN (6) key
for intensity adjustment during program running.
Fig 19
Sub programs are:
1, ROOT (Root / Muladhara 194.18 Hz)
2, SACL (Sacral / Svadhisthana 210.42 Hz)
3, SOLR (Solar Plexus / Manipura 126.22 Hz)
4, HERT (Heart / Anahata 136.10 Hz)
5, THRT (Throat / Vishuddha 141.27 Hz)
6, THRD (Thrid Eye / Ajna 221.23 Hz)
7, CRWN (Crown / Sahasrara 172.06 Hz)
Fig 20
While a program is running, screen will display each program’s title (Fig 20) with clock dots
flashing to indicate the timer is counting. Press SELECT (5) key will pause current program
changes that will stay as current frequency. Title also flashes to indicate frequency. Press
SELECT (5) key again will push frequency change to another one and carry on the cycle.
Fig 21
To Set up: (fig 21)
Insert stereo patch lead into the output (4) of the BT Pro LCD unit. Insert the other end into
the input of the TMS COIL device. Insert the MagnaCoil into the “COIL” output on the TMS
device. Plug the power supply into this to operate. BE SURE TO USE ONLY THE POWER
SUPPLY THAT CAME WITH EACH DEVICE! Do not mix the power supplies up as some
devices require different voltage power. The TMS device acts as an amplifier that sends the
frequencies to the MagnaCoil. Place this under or next to the body.
Stereo patch lead
From ‘Output’
on BT Pro to ‘INPUT’
on TMS
BT Pro LCD with
‘CHBL’ selected
Magnacoil
plugs into
“COIL” on TMS
24 volt Power
Supply for
TMS adaptor