background image

4

PURE Aquarium KIT

CAUTION

Use the product exclusively as decorative aquarium 
for indoor domestic use.

Each component is an integral part of the product.
It shall not be used on other products.

Do not use the product for use with foodstuffs.

Do not use the product as terrarium.

Do not use the product, if damaged and/or disassem-
bled.

Do not damage and/or remove the sealant positioned 
on the joints of the tank glasses (edge seals).

Do not lean any rocks, stones or other heavy decorat-
ing elements directly on the bottom of the tank.

Do not place any item on the product.

Verify the integrity of the product before pouring water 
into the tank.

The thermal heater must always be immersed at least 
up to the minimum level marked on the same.

Install the electric devices of the product observing the 
voltage and frequency values shown on the devices 
and the temperature ones specified among the techni-
cal data under 

par. 3.3.

Connect the electric devices to mains protected by a 
residual current device with a sensitivity 

 30 mA.

After maintenance operations, if necessary, dry the 
external parts of the product and the stand.

To protect the polished surfaces of the product from 
scratches and scrapes, pay utmost care when clean-
ing and handling the same.

CAUTION

Do not cut the power cables.
Power cables cannot be repaired. If the cable is dam-
aged, the product has to be discarded.

Do not use extension cables.
If the length of the power cable of the electric devices 
is not sufficient, refer to a qualified electrician.

Do not try to repair any product component: in case of 
damage replace the damaged component with original 
spare parts 

(see chap. 9).

2. CONTENTS

1. IMPORTANT SAFETY INFORMATION 

page 3

2. CONTENTS 

4

3. PRODUCT SPECIFICATIONS 

4

4. PREPARING THE PRODUCT FOR USE 

7

5. STARTING UP THE SYSTEM 

8

6. MAINTENANCE AND CLEANING 

12

7. TROUBLESHOOTING 

13

8. STORAGE AND REPACKING 

14

9. OPTIONAL MODULES AND SPARE PARTS 

14

10. PRODUCT DECOMMISSIONING 

14

3. PRODUCT SPECIFICATIONS

3.1.  Product identification

Name

Components

Askoll PURE

 LED

 Aquarium KIT

Mod.

PURE XL HC LED MARINE

Lighting unit

Mod.

PURE LED UNIT XL MARINE

Type

T-52103

Thermal heater

Mod.

THERM L (200W)

Type

D-38200

Pump

Mod.

PURE PUMP XL HC

Type

C-04311

Summary of Contents for PURE XL HC LED















Reviews: