Servicemanual WM60
27
Test motor, Testing Motor, Test motor,
Motortest, Tester motor, Test av mo-
tor, Moottoritesti, Essai moteur, Motor
testen, Test motore, Test motor,
Teст
мoтoрa
, Test motor
The motor is running at normal action (49 rpm)
Test drain, Testing Drain, Test drain,
Tömningstest, Tester udpumpning,
Test av tømming, Tyhjennyspumppute-
sti, Essai vidange, Abfluss testen, Test
scarico, Test drenaje,
Teст
нaсoсa
,
Test afvoerpomp
Drain pump is on. Pressure sensor value is shown in LCD 2
Test spin, Testing Spin, Test spin, Cen-
tifugeringstest, Tester centrifugering,
Test av sentrifugering, Linkoustesti,
Essai essorage, Schleudern testen, Test
centrifuga, Test centrifugado,
Teст
oтжимa
, Test centrifugeren
A Spin sequence is performed, the drain pump is running. Unbalance value is shown in
LCD 2.
Test door, Testing Door, Test door,
Dörrtest, Tester luge, Test av dørlås,
Luukun lukon testi, Essai porte, Luke
testen, Test sportello, Test puerta,
Teст
зaмкa
двeрцы
, Test deurslot
Door lock is activated, the door is then opened.
Press
to exit the service menu
0
Setting amount of water taken into the machine. Default value is ”0”.
-15%
-10%
-5%
+5%
+10%
+15%
Press
to exit the service menu
0
Adjust LCD contrast. Default value is ”0”.
+3
+2
+1
-1
-2
-3
Press
to exit the service menu
Rinses3, Rinses3, Rinses3, Sköljning3,
Skylninger3, Skylling3, Huuhtelut3,
Rinçage3, Spült3, Risciacqui3, Enjua-
gues3, o o a e3, Spoelen3
Adjusting the default setting for rinsing (default = 5 rinses).
Setting can be made in heavy (Program 2), White (3) colour (Program 4)
Rinses5, Rinses5, Rinses5, Sköljning5,
Skylninger5, Skylling5, Huuhtelut5,
Rinçage5, Spült5, Risciacqui5, Enjua-
gues5, o o a e5, Spoelen5
Press
to exit the service menu
Service menu WM60.3 continuation
