background image

Servicemanual WM60

21

Press 
-/+

Comments/instructions

Press

The maximum number of rinses is seven and varies 
depending on selected program. Can be used with 
all programs except Auto, Time, Rinse, Spin or 
Drain programs.

Superrinse

Press

Additional water is used during the main wash and 
rinse cycles. The machine takes in the additional 
water for the high water level about 15 minutes 
after the main wash has started.

High waterlevel

Press

The drum rotate for three seconds /minute for two 
hours. Can be used with alla programs except Auto, 
Time, Wool/hand, No spin and Rinse. 

Easy care

Press

Increases the time during which water is pumped 
into the machine. Can be used with alla programs 
except Time, Quick, Wool/hand and Rinse.

Superwash

Press

The laundry lies for two hours in cold water. Can be 
used in all programs except Auto, Time and Rinse.

Presoak

Making settings WM60.2

Comments/instructions

• Turn off the machine using the main power switch.
• Press and hold the + on the Time button and the 
Super Rinse button, turn on the Main power switch.
• Turn the program selector choose ”Child-safe 
start off” or Child-safe start on” 
• Press Start/Stop button to store.
Deactivate Child-safe start by pressing Super Rinse 
and Start/Stop at the same time. The option will be 
temporarily deactivated for three minutes.

Child safety

• Turn off the machine using the main power switch.
• Press Main power switch and Super rinse button.
• ”Door open is shown” on the disply. 
• Press Start/Stop button to store.

Automatic door opening

• Turn off the machine using the main power switch.
• Press Main power switch and Start/Stop button
• Turn the program selector and choose language.
• Press Start/Stop button to store.

Language

Selecting options WM60.2 

Summary of Contents for WM60.1


















































Reviews: