Occasional options
Setting/Option
Description
Limitations
Program types
Available programs are described in a separate table
in this chapter.
When the program type is changed all options and
settings are set to their original values.
Temperature C,30-95°C. The temperature can be adjusted at any time by
pressing the button before starting. C denotes the
temperature of the incoming water. Temperatures over
60°C are not permanently stored.
For some program types it is only
possible to select temperatures of
between 30 and 40°C. See table.
Spin speed 400-1600
rpm
No spin
No drain
The speed to be displayed when the preset program
(P1-P4) has been selected is selected here.
No spinning takes place if No spin and No drain are
selected. No drain allows the water to remain in the
machine or wash.
A setting can be changed at any time by pressing the
button before starting.
For some program types a speed of only
400-8080 rpm can be selected. See
table.
.No spin and No drain cannot be
selected for the program types Spin and
Drain
Delayed start
(0…24 hours)
If you select Delayed start to five hours, for example,
the machine will start five hours after you have
pressed the start button. The time until start appears
on the display. Changes in this option are not per-
manently stored.
Can be used on all programs.
Super rinse
Super rinse On adds extra rinses in the wash pro-
grams. See table.
Cannot be selected for the program
types Rinse program, Spin and Drain.
E2-Economy/Efficiency E2-Economy/Efficiency On extends the main wash by
approx. 22 minutes.
For more information on how to use E2, see Chapter
8, Before you wash, in the instructions for use.
Can only be selected for the programs
Heavy wash, Normal wash and Light
wash.
Pre-soak
Pre-soak On means that the wash will be soaked for
two hours before the main program starts.
Cannot be used for the program types
Rinse program, Spin and Drain.
Anti-crease
Non-crease On means that the machine rotates the
drum for a few seconds every minute two hours after
the end of the program. During this time you can
end the program by pressing the door open button.
Cannot be used together with No
spin and No drain.
Cannot be selected for the program
types Rinse, Spin and Drain.
High water level On means that an extra amount of
water is used in the main wash and rinses.
Sensor function
The rinse sensor function On means that the machine
rinses the wash free of washing powder residues
without consuming an unnecessary amount of water.
Cannot be selected for the program
types Quick wash, Super quick wash,
Rinse program, Spin and Drain
P1
P2
P3
P4
WM5566-OPT
Program information
Settings and options
Program type
Temperature ° C
Spin speed rpm
Super rinse
E2 Energy/Efficiency Pre-soak
Anti-crease
High water level
Rinse sensorWM66A only
(A) 0 hours means that the option has not been activated. This option can only be
changed occasionally.
(B) This option cannot be selected for the current program type.
( C) This option is always switched to the current program type and cannot be
switched off.
Delayed start (A)
60°C 1600
Normal wash
0 tim
Off
Off
Off
Off
Off
On
40°C 1200
Light wash
0 tim
Off
Off
Off
Off
Off
On
30°C 800
Hand wash
0 tim
Off (B)
Off
Off (C) POnå
40°C 800
Super quick wash
0 tim
Off (B)
Off
Off
Off (B)
Default settings
Cannot be selected for the programs
Wool wash and Hand wash.
They already have a high water level.
High water level
