background image

18

Settings

You can change the following 

settings:

•  Automatic door opening.

• Extra 

rinses.

Door opening

If you choose Automatic door opening the 

Washer door will open once the program has 

fi

 nished.

1. Turn o

  the machine using the main power 

switch.

2.  Press and hold the Super rinse button and 

then switch on the main power switch.

3.  “AdO” is shown on the display if Automatic 

door opening is activated or “AdF” if the 

option has not been activated.

4.  Press the Super Rinse button to change the 

setting.

5.  Press the Door opening button to save the 

setting.

Extra rinses

Upon delivery, your washing machine is set to 

use three rinses in the Everyday wash program. 

If you want to increase the number of rinses to 

fi

 ve for this program, do as follows:

1. Turn o

  the machine using the main power 

switch.

2.  Press and hold the Delayed start button and 

then switch on the main power switch.

3.  The display shows "R O" if extra rinses 

(5 rinses) is activated or "R F" if it is not 

activated (3 rinses).

4.  Turn the program selector to change the 

setting.

5.  Press the Door opening button to save the 

setting.

Summary of Contents for W6564W

































Reviews: