Asko W6564W, Operating Instructions Manual

Page: 15 / 32

15
Washing
6
Select options
You can select options to adjust the
wash program to suit your own speci fi c
requirements. The available options depend on
the selected program. If the option is available
for the selected program, the symbols lights up
when you press the button.
The machine will remember the options you
select for each program (with one exception
– Delayed Start). You can still change the
selected options the next time you select the
program in question.
Temperature
• Select the temperature by pressing
the button until the LED by the desired
temperature lights.
• You can select temperatures between 20 °C
and 95 °C. For Wool/hand wash you cannot
choose a temperature higher than 40 °C.
For Synthetics or Easy Care the maximum
temperature is 60 °C.
Spin
• Select the spin speed by pressing the button
until the LED by the desired speed lights.
• You can select speeds between 400
and 1600 rpm, No spin or No drain. The
maximum spin speed varies according to the
program selected, so check the LEDs around
the button.
• , means that the program does not include
a spin cycle and ends by draining.
• No drain means that the program does not
include a spin cycle and ends with the water
from the fi nal rinse still in the machine. The
washing will remain covered by the water
from the fi nal rinse, stopping it from getting
creased. If you have selected "No drain", you
must select the Spin & Drain program and
the symbol (no spin) once the program
has ended to drain the water from the
machine before you open the washer door.
Super wash
Super wash can be selected to better dissolve
di ffi cult stains and heavy soiling on clothing.
This option adds a cold pre-wash and the wash
time in cold water is extended by approximately
six minutes. The main wash time is also
extended.
• Select Super wash by pressing the button by
the symbol.
• An LED next to the button lights when this
option is activated.
High water level
• High water level means that additional water
is used during the main wash and rinse
cycles. This option can be used with all
programs except Wool/hand wash, Rinse
and Spin & Drain.
• Select High water level by pressing the
button by the symbol.
• An LED next to the button lights when this
option is activated.
NOTE!
The machine takes in the additional water for
the high water level about 15 minutes after the
main wash has started.
Cold
30°
40°
50°
60°
95°
800
1600
1200 400