Asko W6088X.S.AU Instructions For Use Manual Download Page 49

Page: 49 / 64

FAILURE DISPLAY

In case of a failure while a program is in progress, the relevant Error XX is indicated on the display unit.

Error

Error XX

Exit

Info

Press the INFO button to display the

error description.

Switch o

ﬀ

the appliance and turn it back

on.

Errors indicated on the display unit may include the following:

Error

Error indication on the display unit

What to do?

INCORRECT SETTINGS

Restart the programme. If the error reoccurs, call a service

technician.

THERMISTOR ERROR

Temperature sensor error.

• Inlet water too cold. Repeat the washing program.

• If the appliance reports this error again, call a service

technician.

DOOR LOCK ERROR

Turn the appliance OFF and then switch it again ON. Start the

program again. If the error reoccurs, call service technician.

WATER FILLING ERROR

Check the following:

• is the water inlet valve open,

• is the filter on the water inlet hose clean,

• is the water supply hose deformed (clipped, clogged etc.),

• is the pressure in the water mains between

0.1 and 1 MPa (1–10 bar).

Then, press the

Exit

button to resume the program.

If the error reoccurs, call a service technician.

HEATING ERROR

Water heating error.

Restart the program. If the error reoccurs, call a service

technician.

DRAINING ERROR

Water draining error.

Check the following:

• is the pump filter clean,

• is the drain hose clogged,

• is the drain clogged,

• is the drain hose fitted at the right height (see chapter on

drain hose installation in the instruction manual).

Then, press the

Exit

button again. If the error reoccurs, call a

service technician.

SPINNING ERROR

Turn the appliance OFF and then switch it again ON. Start the

program again. If the error reoccurs, call service technician.

E10

WATER LEVEL SENSOR ERROR

Turn the appliance OFF and then switch it again ON. Start the

program again. If the error reoccurs, call service technician.

E11

OVERFLOW

If there is water in the drum that exceeds a certain level,

and an error is reported on the display unit, the washing

program will be interrupted and water will be pumped out of

the washing machine. Restart the programme. If the error

reoccurs, call a service technician.

If there is water in the drum that exceeds a certain level, and

an error is reported on the display unit, while the washing

machine continues to add water, close the water tap and call a

service technician.

E12

MOTOR ERROR / MOTOR

CONTROL ERROR

Restart the program. If the error reoccurs, call a service

technician.

Summary of Contents for W6088X.S.AU

































































Search results

Summary of Contents for W6088X.S.AU

Reviews:

Related manuals for W6088X.S.AU

Brands by name

Popular brands

Asko W6088X.S.AU, Instructions For Use Manual

Search results

Summary of Contents for W6088X.S.AU

Reviews:

Related manuals for W6088X.S.AU

Brands by name

Popular brands