• Do not use any solvents, abrasive cleaners, glass cleaners, or
all-purpose cleaners.
• Do not place the dryer behind lockable or sliding door, or door
with a hinge on the opposite side of the dryer door hinge. Install
the dryer in such way that the door can always be freely opened.
• Never block the air vents.
• Do not place the dryer on a carpet with long fibres as this may
impede air circulation.
• The air in the room where the dryer is installed may not contain
dust particles.
• Make sure the fibres do not accumulate around the dryer.
•
DANGER OF FIRE!
Remove all objects such as lighters and matches from the
pockets.
• After installation, wait for 24 hours before using the appliance. If
the dryer has to be laid down on one of the sides during transport
or servicing, place it with its left side, viewing from the appliance
front, downwards (only applies to dryers with a heat pump).
• The appliance shall not be in contact with a wall or adjacent
furniture.
• If the dryer is connected to an air exhaust system already used
for another appliance, a non-return valve must be installed.
Reverse flow into the dryer could damage the appliance, and the
non-return valve prevents such reverse flow (only applies to the
evacuation dryer).
• A float will switch off the appliance if the condensed water pipe
is clogged or if there is a risk of overflowing of the condensed
water accumulated in the condensed water tank (only applies to
the evacuation dryer).
• If you wish to move the dryer or store it in a non-heated room
during winter, it is essential that you first empty the condensed
water tank (only applies to the condenser dryers and dryers with
a heat pump).
6
Safety precautions
