STEP 6: Close the door and start the drying process.
Close the dryer door and press the
Start
/Pause button.
Start (pressed briefly – start/resume)
Pause (short press of the button - pause)
Stop (press and hold for 3 seconds – stop or cancel)
Remaining time
Depending on the selected program and load, anticipated drying time will be displayed in hours
and minutes.
Actual drying time will depend on the selected program, load, type of laundry, spinning rate etc.
Actual drying time may be longer or shorter than initially displayed.
Pausing, stopping or changing the program
To pause a program, briefly press the Start/Pause button.
To resume the program, press the
Start
/Pause button again.
The drying program may also be paused by opening the dryer door.
To resume the programme, simply close the door and press the
Start
/Pause button.
To stop and cancel the drying program, press the Start/Pause button and hold it for 3 seconds.
The selected program will be stopped and the cooling stage will begin. Cooling time depends on
the selected program.
Only after the cooling is complete, can you use the program selector knob to select a new program
and press the
Start
/Pause button.
WARNING!
The final drying cycle includes a cooling down stage without heater operation. It makes sure the
laundry is of suitable temperature at the end of the program and that it can be taken from the
dryer without risk of touch hot clothes.
A drying program can be paused using the ON/OFF button.
The tumble dryer will switch off.
29
Drying process, step by step
