12
Customer Care Center, 1-800-898-1879, www.askousa.com
DRYING PROGRAMME FINISHED
The text Done appears on the display when the
programme is
fi
nished. If the Anti crease option has
been selected, the drum will rotate for three seconds per
minute for two hours after the programme is
fi
nished.
The compressor’s cooling fan continues to run after the
program
fi
nishes, but stops automatically or when any
button/knob is activated.
Backlighting
Two minutes after the drying programme
fi
nishes the
backlighting on the display and options buttons enters
energy saving mode. Turn the programme selector if you
want to activate the machine.
Condensed water
The condensed water container must be emptied after
each load. Remove the condensed water container,
empty out the water and replace the container. If the
condensed water container becomes full to over
fl
owing,
the program is interrupted and Over Flow appears on the
display. Empty the container and press the Start button
to start a new program.
TIP!
The condensed water is decalci
fi
ed and can be used
in steam irons. Pour it through a co
ff
ee
fi
lter.
NOTE!
• Clean the lint
fi
lter in the outer door after each load.
See the Care and cleaning chapter.
• Clean the steamer and the steamer
fi
lter at the
intervals shown on the machine’s display or more
often.
• Empty the condensed water container after each
load.
WARNING!
If the lint
fi
lter becomes clogged, the machine’s
automatic overheating cut-out may be triggered.
Clean the
fi
lter, wait until the machine has cooled then
try starting it. If it still does not start: call the service
division.
Once drying has
fi
nished
Turn o
ff
the main power switch. Remove the clothes and
close the door to prevent small children from climbing
into the machine.
TUMBLE DRYING
