16
Care and cleaning
Cleaning the lint filter
The lint filter must be cleaned after each load.
1. Lift the filter from the holder in the door.
2. Open the lint filter. Push against the edge
with your thumb as shown in the figure.
3. Open the inner filter as shown in the figure.
4. Use your hand or a soft cloth to remove the
lint from all sides of the filter. If necessary,
use a damp sponge and a small amount of
washing-up liquid to remove any deposits.
Dry the filter thoroughly with a towel.
NOTE!
Clean the surface of the lint (fluf) filter after each
drying program.
5. To close the lint filter, follow the reverse order
of steps used for opening. Then, replace the
filter by sliding it back into the door. Close the
lint filter before closing the door.
Summary of Contents for T794C
Page 27: ...27 Notes...
