14
Care and cleaning
Cleaning the lint
fi
lter
The lint
fi
lter must be cleaned after each load.
1. Lift the
fi
lter from the holder in the door.
2. Open the lint
fi
lter. Push against the edge
with your thumb as shown in the
fi
gure.
3. Open the inner
fi
lter as shown in the
fi
gure.
4. Use your hand or a soft cloth to remove the
lint from all sides of the
fi
lter. If necessary,
use a damp sponge and a small amount of
washing-up liquid dish soap to remove any
deposits. Dry the
fi
lter thoroughly with a
towel.
NOTE!
Clean the surface of the lint (
fl
u
ff
)
fi
lter after
each drying program.
5. To close the lint
fi
lter, follow the reverse order
of steps used for opening. Then, replace the
fi
lter by sliding it back into the door. Close the
lint
fi
lter before closing the door.
