13
Tumble drying
7
Drying program
fi
nished
The text "End" is shown on the display
for 2 minutes. The machine then turns
o
ff
. The compressor’s cooling fan continues
to run after the program
fi
nishes, but stops
automatically or when any button/knob is
activated.
Condensed water
The condensed water container must
be emptied after each load. Remove the
condensed water container, empty out the water
and replace the container. If the condensed
water container becomes full to over
fl
owing, the
program is interrupted. Empty the container and
press the Start button to start a new program.
TIP
The condensed water is decalci
fi
ed and can
be used in steam irons. Pour it through a co
ff
ee
fi
lter.
NOTE!
• Clean the lint
fi
lter in the outer door after
each load. See the Care and cleaning
chapter.
• Clean the evaporator and the evaporator
fi
lter at the intervals shown on the machine's
display or more often.
• Empty the condensed water container after
each load.
WARNING!
If the lint
fi
lter becomes clogged, the machine’s
automatic overheating cut-out may be triggered.
Clean the
fi
lter, wait until the machine has
cooled then try starting it. If it still does not start:
call the service division.
Once drying has
fi
nished
Remove the clothes and close the door to
prevent small children from climbing into the
machine.
