background image

EN 9

DESCRIPTION AND USE

Starting Dry Run Function

After using the vacuum drawer for a period of time, there will be 
moisture in the oil of the vacuum pump. Because of this, the device 
may vacuum insufficiently. It is then advised to perform the Dry Run 
Function. If vacuuming does not work, then the Vacuuming Failure 
indicator and the Dry Run Function indicator light up. After a number of 
warnings (Vacuuming Failure indicator and Dry Run Function indicator 
lighting up), it is advised to perform the Dry Run Function.
1.  Press the Dry Run Function touch key to start the Dry Run Function. 
2.  Immediately afterwards, shortly press on the front of the lid so that 

the vacuum chamber can vacuum. 

The Dry Run Function symbol flashes during drying.

Note!  

If the Dry Run Function does not completely remove the 

moisture from the oil after a maximum of 20 minutes, then the drawer 
switches to a ‘cool off’ setting. The vacuum drawer can then not be 
used for a period of one hour. The Dry Run Function indicator is visible 
in the display. After that, start the Dry Run Function again!

 

Regular use of the Dry Run Function is part of the normal operation 
of the vacuum drawer.

Summary of Contents for ODV8127A/VS140

















Reviews: