Settings
Do as follows to open the settings menu:
Turn off the dishwasher using the main power switch. Wait about five seconds.
1.
Then press the main power switch again. Wait until the numbers appear in the right-hand display before continuing to
the next step.
2.
Within five seconds, press and hold the Program selector (wait for the audible signal confirming the button press) and
then immediately press the Long dry button without releasing the Program selector.
3.
+
Keep the buttons pressed until the symbols for the Heavy wash and Rinse & Hold programs start to flash.
4.
TIP!
Be sure to press right on the symbols, so as not to inadvertently activate any other button. Try again if you fail to open
the settings menu the first time.
P R O G
S TA RT
S T O P
Press to save the set value and continue to
the next setting.
Current setting.
Current setting value.
Press to browse between setting values.
Display
You can now adjust the following settings:
Description
Settings
Options
Button press
You can activate the child lock (button lock) option to
prevent children from starting the dishwasher.
Child lock
(Kid Safe™)
(Off)
(On)
Press the High temperature and Long dry buttons simulta-
neously to temporarily deactivate the button lock when
you want to start the dishwasher. The button lock is auto-
matically reactivated after 2 minutes.
Press Start/Stop to save the setting value and continue to the next setting.
If you do not want to change any other settings, keep pressing Start/Stop to step through the entire settings menu.
The dishwasher uses a buzzer to indicate when a program
is finished or when a fault has occurred.
Buzzer volume
(Off)
(Low)
(High)
Press Start/Stop to save the setting value and continue to the next setting.
Customer Care Center 1-800-898-1879
www.askona.com
11
