Asko D3100, Use And Care Manual

Page: 21 / 36

21
Settings
Setting water hardness
If you have a dishwasher with a water softener, you may need to change the setting de-
pending on the water’s hardness level. Phone your local Water Board to check the water
hardness in your area. The dishwasher is set for low water hardness on delivery.
1. Switch off the dishwasher with the main switch.
2. Press the main switch while holding in the Start/Stop button.
3. Release both buttons and the L7 light will flash.
4. Select desired setting (see table below) by pressing repeatedly on the Program
button.
5. Confirm your selection by pressing the Start/Stop button. You now automatically leave
the settings menu and the selected setting remains until you want to change it.
L1
L2
L3
L4
L12 L7
L11
PROGRAM
START
STOP
S1
S2
Setting ˚dH ˚fH
All
extinguished
0-5* 0-9*
L1 lit
6-8 9-14
L1, L2 lit
9-14 15-25
L1, L2, L3
lit
15-19 26-34
L1, L2, L3, L4
lit
20-29 35-52
L1, L2, L3, L4,
L11 lit
30-44 53-79
L1, L2, L3, L4,
L11, L12 lit
45 and
up
80 and
up