Areas up to
Bris
Kuling Storm
5 m2
20 minutes
10 minutes
5 minutes
10 m2
30 minutes
20 minutes
10 minutes
20 m2
60 minutes
40 minutes
15 minutes
40 m2
120 minutes
60 minutes
25 minutes
60 m2
-
90 minutes
35 minutes
80 m2
-
120 minutes
45 minutes
100 m2
-
-
60 minutes
120 m2
-
-
75 minutes
140 m2
-
-
90 minutes
160 m2
-
-
100 minutes
180 m2
-
-
110 minutes
200 m2
-
-
120 minutes
We always recommend that you start with a short treatment time and if needed repeat and extend the treatment
time.
Recommended time for different surfaces
USER GUIDE
TREATMENT TIME
All Åskluft models have adjustable treatment time,
between 5 minutes and 2 hours. The optimal treat-
ment time depends on various factors such as tem-
perature, humidity, air currents, etc. It is advisable to
try to find the optimal treatment time for the space in
question. Ideal temperature is normal room tempera-
ture and not too high humidity.
Note that although ozone is a heavy gas, i.e. heavier
than air, it will initially rise in most conditions. This is
because the ozone will be warmer than the ambient air
when it is produced and it then rises due to so-called
thermal convection (i.e. “hot air rises”). Therefore, it is
a good idea to place your ozone generator low in the
room, preferably on the floor, in order to fill the space
with the ozone in the most efficient way. Open cabinets
and the like where you want the ozone to access.
8
Advanced use
Reprogram the operating time for
cyclical operation
1.
Hold until the display shows the opera-
ting time. (The factory setting is 120 minutes).
2.
Use and/or to adjust
operating time.
3.
Then press again, and the machine
shows the standby time between decontami-
nations. (The factory setting is 22 hours) .
4.
Use and/or to set the standby time.
5.
Press again to confirm the programming.
Start of the cyclical decontamination
1.
Turn on the machine by pressing
2.
Then press to start cyclical decontami-
nation. The machine will now operate according to
the new programming.
