Page
24
/
71
z
2.4GWi-Fi Network / 5GWi-Fi Network: It may help you to Enable or Disable the
2.4GHz / 5GHz wireless function.
z
Current Channel: The channel that you choose will be displayed in this field.
z
Current Bandwidth: The bandwidth that you choose will be displayed in this field.
z
Current Sideband: The sideband that you choose will be displayed in this field.
z
Wi-Fi Name (SSID): The SSID for 2.4GHz / 5GHz wireless function.
z
Interface Type: There are three different modes can be selected. 2.4GHz can be
selected 802.11b/g, 802.11b/g/n and 802.11n only; 5GHz can be selected 802.11a,
802.11a/n/ac and 802.11n/ac only.
z
Sideband (40MHz only): There is “Lower” and “Upper” can be selected if Bandwidth
40 MHz was enabled.
z
Channel: In 802.11 Band 2.4GHz, there are 1 to 11 channels. In 802.11 Band 5GHz,
there are 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161 channels. Choose the one
that is suitable for this device.
z
The 5.25-5.35GHz and 5.47-5.725GHz DFS bands are not available for USA marketing models
z
Bandwidth: Select wireless channel width 20/40 MHz is for 2.4GHz Wi-Fi default value,
and 20/40/80 MHz is for 5GHz Wi-Fi default value. (Bandwidth taken by wireless
signals of this access point.)
z
Output Power: This setting decides the output power of this device. You may use it to
economize on electricity by selecting lower percentage of power output. Control the
range of the AP by adjusting the radio output power.
z
Broadcast SSID: Broadcasting the SSID causes the name of your network to appear in
the list of available networks.
z
Wi-Fi Protection: The method of Wi-Fi protection can be OFF, WPA, WPA2/AES or
WPA+WPA2/TKIP+AES.
z
Network key: The network key is the password that you use to authenticate with your
router.
z
QR Code: Use QR code scanning APP on the smartphone to get Wi-Fi Name (SSID), Wi-
Fi Protection and Network key.
