ADSL Router User Manual
44
Note: If Reset to factory default settings is checked, the settings will return to factory
defaults, including the Username and Password.
Status
D
D
S
S
L
L
C
C
o
o
n
n
n
n
e
e
c
c
t
t
i
i
o
o
n
n
This page shows the DSL line connection status as below:
Line Mode
:
The ADSL Router supports multi-mode standard:
ANSI T1.413
,
G.lite
(ITU-T G.992.2)and
G.dmt
(ITU-T G.922.1).
DS (Downstream)/US (Upstream) Speed
: The downstream/upstream speed of the DSL line.
DS/US Latency
: Displays whether a fast or interleaved latency path is specified.
Trellis coding
:
Indicates trellis coding is enabled or disabled. Trellis coding is a method of providing better
performance in a noisy environment. It helps to transmit at faster line rates with lower error rates,
thus providing a faster overall throughput in a moderately noisy environment.
Line Attenuation
: Indicates the signal attenuation caused by line length. It increases with line length and frequency
and decreases as wire diameter increases.
Noise Margin
:
Signal to noise ratio. The ratio of good data (signal) to bad (noise) on the line, expressed in
decibels (dB).
Loss of Signal /Frame
: Indicates the loss of signals or frames detected.
CRC Error
:
Cyclic Redundancy Checksum generated.
Line Up Count
: The number of times that you connet to.
Line Up Time
:
The duration time of the line connecting.
Error Second
:
The accumulated seconds of the seconds during which packet error message occur.
System
Up Time
: The time from system startup.
