manualshive.com logo in svg

Askey RT210W, User Manual

Share
Download
Askey RT210W User Manual Download Page 32

Wireless Broadband Router User Manual 

24 

Connect on Demand: 

If enabled, the router will trigger a PPP 

session for connection to the Internet if any client PC on your 
LAN sends out a request for Internet access. However, the 
router automatically disconnects the PPP session after the 
WAN connection has been idle for the amount of time you 
specified in the

 Max Idle Time

 box. If your Internet account is 

billed based on the amount of time of your Internet connection, 
you probably want to enable this option and enter an idle time 
value best suitable for your network. 

Manual Connect:

 If enabled, the system administrator can 

manually connect or disconnect the PPP session by clicking 
the 

Connect

/

Disconnect

 buttons in this page. 

MTU/MRU: 

Allows you to adjust the Maximum 

Transmission/Receive Unit in bytes for the WAN interface. You 
may need to adjust the values to a smaller size if the servers of 
your ISP do not support full size frame packets. The packets larger 
than the specified values will be fragmented and the performance 
may therefore be influenced. 

It’s suggested not to modify the MTU/MRU settings unless 
instructed by your ISP. 

After you finish the WAN settings, click 

Apply

 to submit your 

changes. 

 

Figure 4-5    WAN Configuration-PPPoE Client 

Summary of Contents for RT210W




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands