Askey AP6275S, User Manual

Page: 7 / 18

OEM Integration Instructions ：
Important Notice to OEM integrators 1. This module is limited to OEM installation ONLY. 2.
This module is limited to installation in mobile or fixed applications, according to Part
2.1091(b). 3. The separate approval is required for all other operating configurations,
including portable configurations with respect to Part 2.1093 and different antenna
configurations 4. For FCC Part 15.31 (h) and (k): The host manufacturer is responsible for
additional testing to verify compliance as a composite system. When testing the host device
for compliance with Part 15 Subpart B, the host manufacturer is required to show compliance
with Part 15 Subpart B while the transmitter module(s) are installed and operating. The
modules should be transmitting, and the evaluation should confirm that the module's
intentional emissions are compliant (i.e. fundamental and out of band emissions). The host
manufacturer must verify that there are no additional unintentional emissions other than what
is permitted in Part 15 Subpart B or emissions are complaint with the transmitter(s) rule(s).
The Grantee will provide guidance to the host manufacturer for Part 15 B requirements if
needed.
IMPORTANT NOTE ：
Notice that any deviation(s) from the defined parameters of the antenna, as described by the
instructions, require that the host product manufacturer must notify to Askey that they wish to
change the antenna trace design. In this case, a Class II permissive change application is
required to be filed by the USI, or the host manufacturer can take responsibility through the
change in FCC ID (new application) procedure followed by a Class II permissive change
application.
End Product Labeling
When the module is installed in the host device, the FCC/IC label must be visible through a
window on the final device or it must be visible when an access panel, door or cover is easily
re
-
moved. If not, a second label must be placed on the outside of the final device that contains
the following text: “Contains Transmitter Module FCC ID: H8N
-
AP6275S or Contains FCC
ID: H8N
-
AP6275S”. The FCC ID/IC Certification Number can be used only when all
FCC/IC compliance requirements are met.