Connection and Operation:
1. CONNECTION DIAGRAM
1.1 Connect the HDMI input port of the HDMI wireless TX to the HDMI output port of the signal source by
HDMI cable.
1.2 Connect the HDMI output port of the HDMI wireless RX to the HDMI input port of the TV/Monitor by
HDMI cable.
1.3 Connect the IR Transmitter cable to the HDMI wireless TX and the IR Transmitter cable must face to
the control target device.
1.4 Connect IR Receiver cable to the HDMI wireless RX.
1.5 Connect 5V power supplies to the TX&RX, the POWER indicator will be lit at this moment.
1.6 The device will automatically connect after power on. The STATUS indicator of TX and RX will be lit
when the connection is successful. If the HDMI input or output signal is normal, the HDMI indicator
light will be lit also. The STATUS indicator flashes continuously during normal transmission.
1.7 Note: the antenna is located on the side near the IR interface, Please point these two faces towards
each other when placing them.
H
D
M
I-M
in
iH
D
M
Ic
ab
le
TX
RX
USB
H
D
M
I-M
in
iH
D
M
Ic
ab
le
IR
Tra
ns
m
itte
rc
ab
le
IR
R
ec
eiv
er
ca
ble
USB
This side faces
RX
Source remote control
HDTV Monitor/Projector
DVD/PS3/STB/PC
This side faces
TX
