①
RS232 port.
②
LAN port.
③
HDMI output port.
④
HDMI input port (HDMI or DVI).
⑤
Power: Press this button to turn the system on.
⑥
IR extender: This slot is where you can extend your IR receiver with an IR
extender cable that supports only 38KHz.
⑦
Power input: Plug the 12V DC power supply into the unit and connect the
adaptor to an AC wall outlet.
■
Connections and Operations
1) Connect the HDMI input source (
such as HD-DVD/ PS3/STB etc.)Into
HDMX0008M1.
2) Connect HDMI OUT of HDMX0008M1 to display equipment.
3) Connect the Broadband IR receive cable into HDMX0008M1 IR RX ports.
4) Power on the input source you want to show. (
Keep the unused input power
off, otherwise it may interfere the normal display).
5) Plug the power cable into HDMX0008M1.
6)
Turn on the power, when the LED panel stops flashing circularly, the
initialization of the matrix are ready.
7)
Turn on the displays you want to watch.
