USER GUIDE
SVGA DLP PROJECTOR
21
INDICATOR
FUNCTION
ON/OFF
•
NO LIGHT indicates that the unit is completely
switched off by the mains switch
•
GREEN indicates that the unit is operational
•
YELLOW indicates that the unit is in standby mode
(switched off using the remote control or the keypad)
ALARM
•
RED indicates lamp lifetime overdue.
8.3
THE MENU SYSTEM
The menu system is designed to gain access to functions not often used,
as opposed to frequently used features that are directly available through
the remote control and the projector keypad.
Press the MENU key to invoke or exit from the menu system. When the
menu is active, the trackball is used to navigate between options (and
therefore is not available for mouse control etc. at the same time). The
ENTER (left) key is used to activate or deactivate a function.
The PROG key may be assigned to any of the menu functions.
Toggle functions (like OSD, REAR etc) are tagged when active and
untagged when not active.
Increase/decrease functions (like TUNE and FREQUENCY etc) are
adjusted using the trackball or keyboard cursor controls. The OSD field (in
the lower left corner of the screen) indicates the actual settings.
The menu system is toggled on and off with the MENU key. The MENU is
also switched off automatically after one minute of inactivity.
Most settings are memorized unless otherwise noted.
The main menu selections SETUP, PICTURE, SOUND, OPTIONS and
HELP are explained in detail below.
Features available with some sources only are shown in
Italic
characters,
while generally available functions are in normal case.
