USER GUIDE
LCD PROJECTOR
23
7.1.22 S-VIDEO
The S-VIDEO source is selected with this key.
7.1.23 VIDEO
The composite video source is selected with this key.
7.1.24 MIC
The MIC key toggles the microphone input on and off. When on, the MIC is
overlaid the AUDIO input (unless sound is muted).
7.1.25 MENU
The menu system is invoked using the MENU key. The menu system gives
access to basic setup functions that are rarely used. See the separate
Menu System
chapter for details.
7.1.26 ON/OFF
The switch is located next to the mains input. There is also an ON/OFF key
on the RC. This key is used to blank the screen.
7.1.27 RESET
This feature enables standard settings of most controls (see the 'MEM'
column in the remote control description, where YES also indicates a
standard setting). RESET will only reset the active mode.
A fundamental master reset may be performed by pressing all
four RESET, BRIGHTNESS and TUNE buttons simultaneously
for approx. 5 seconds, wait until the image reappears, then
switch off the power. Repower the unit again. All settings will
then return to factory defaults. Do not perform a master reset
unless it is really required. This operation will also erase all
custom sources and modes that have been memorized.
Summary of Contents for Impression 750
