manualshive.com logo in svg

Ask Proxima E2425, User Manual

Share
Download
Ask Proxima E2425 User Manual Download Page 56

56

Problems

– Solutions

No image

- Check the connection between PC or video equipment
- Check with the signal from PC is correct. If connected to
  certain laptops, the settings of their video adapters need to be 
  changed.You can refer to the operating instructions of the PC 

  for such modification.

- Images can show up only about 20 seconds after the projector 
  is powered on.
- Check the input signal, color system, video system or PC 
  system mode.
- Make sure that the temperature doesn’t exceed the permitted 
  operating temperature (41

˚

F–95

˚

F [5

˚

C–35

˚

C]).

- If non-displaying function is enabled, no image will appear on 
  the screen. You can then press the non-display key or other 
  keys.

Ineffective power control

- When the system is standstill, or no-display function is enabled,    
  the power control is ineffective.

Ineffective icon selection

- Check the wiring and the signal of input source, and make sure 
  there is signal.

Ineffective automatic setting

- Make sure all functions in automatic setting are enabled.
- Make sure the function of ceiling is not enabled.

Distorted image or no image

- Check and adjust the PC menu or on-screen menu.

The PIN code dialog box popes 
up in the startup process

- A PIN code is set for locking.

Remote control doesn’t work

- Check the battery.
- Make sure there is no obstacle between the projector and the
  remote control.
- To use the remote control, keep it within 5 meters away from 
  the projector.
- Make sure the code of the remote control is consistent with the
  projector.
- Unlock the key through the setup menu.

The indicator is illuminated or 

flashes

- Check the state of the projector according to the indicator.

Exclamatory mark appears on 
the screen

- Ineffective operation. You should operate the system correctly.

The side control panel doesn’t 
work

- Unlock the keys on the side control panel through the item
  “security” in the setup menu.

PIN code lock for startup 
animation, key lock and PIN 
code lock can’t be unlocked.

- Contact the local distributor or the repair center.

Appendix

Warning:

Is operated with high voltage. Do not open its casing!

If the problem still exists after you take the aforesaid measures, you should contact the local distributor 
or the repair center and tell the machine model. The projector will tell you how to handle the issue.

Summary of Contents for E2425









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands