Operating Instructions and Parts Manual
Hand Dryer
Recessed High-Speed
ADA
-compliant hand dryer
4
www.asijdmacdonald.com.au
www.asijdmacdonald.com.au
1800 023 441
A S I J D M a c D o n a l d P t y . L t d .
General safety information
Disconnect power at the
service breaker before installing or servicing.
This product is intended
for installation by a qualified service person.
Use AWG NO. 12 solid conductor for wiring.
All units must be supplied
with a 3-wire service. The ground wire must
be connected to the dryer's backplate.
Failure to properly ground
unit could result in severe electrical shock
and/or death.
Installation Kit Included (find in carton)
1. Wall box Installation Screws (M5x25 Philips pan head self threading) x 4 pcs
2. Nylon bushing x 1 pc
3. Crimp-on terminal wire tip x 3 pcs
Service Tool Included (with installation kit)
Security hex
4 mm x 1 pc (5/32" pin-hex will work if tool is lost)
wrench
Please unpack the unit and check the quantity of the above tool and kit.
Operation
See Installation Guide (IG) on pages 2 & 3
Shake excess water from hands.
Place hands under the nozzle and dryer automatically starts operation. LED in sensor array shines
blue light during operation to guide user to optimal hand placement for fastest drying time.
Rub hands lightly and rapidly under the nozzle.
Dryer stops when hands are removed from
sensor zone or if maximum time is reached.
Sensor Adjustment Control.
See sensor range adjustment section on page 5
DO NOT OVER TURN!
Recommended mounting heights
- from top edge of hand chamber above finished floor (AFF)
(50")
Men
Women
Children 4-7 years
Children 8-10 years
Children 11-13 years
Children 14-16 years
Handicaped
1270 mm
(47")
1194 mm
(35")
889 mm
(39")
991 mm
(43")
1092 mm
(47")
1194 mm
(40")
1016 mm
