Flash Version History
2007-03-09 EtherLink/2 1.0.1.5
•
Improves communication at 1200 baud.
2006-10-13 EtherLink/2 1.0.1.4
•
Fixed TCP/IP stack problems when running for a long time.
•
Improved performance from the TCP/IP and UDP messaging.
2006-09-07 EtherLink/2 1.0.1.3
•
Adds Notify Retry Interval [no less than 60s] to reduce traffic when Monitor is
not responding.
2006-05-03 EtherLink/2 1.0.1.2
•
Improves Remote Point Updates
2006-04-20 EtherLink/2 1.0.1.1
•
Now accepts WebLink IP address set to "0.0.0.0"
2006-04-17 EtherLink/2 1.0.1.0
•
Embeds a simple UDP command protocol for remote reset (hard reboot), and
restart (software reset - faster).
•
new utility called etherboot.exe, which prompts for remote IP address, username
and password, before sending the command to the EtherLink.
2006-03-07 EtherLink/2 1.0.0.9
•
Fixes a potential infinite loop in the remote point post to weblink code.
2006-02-16 EtherLink/2 1.0.0.8
•
New HTTP Post code for sending remote points
EtherLink/2 1.0.0.6 (Not Released) 2006-01-19
•
Adds Remote Point capture
EtherLink/2 1.0.0.5 2005-09-30
•
Now validates IP addresses before accepting them.
•
DHCP Waits 60 seconds for network to assign an IP address.
•
"reset" pushbutton always available to recover the unit via the serial port
configuration dialog.
EtherLink/2 1.0.0.4 2005-08-19
•
Fixes problems with single-quote ['] in location field.
EtherLink/2 1.0.0.3 2005-08-09
•
Improves internal operation.
EtherLink/2 1.0.0.2 2005-08-05
•
Adds watchdog timer to prevent lockups.
EtherLink/2 1.0.0.1 2005-08-02
DOC-1643 (2008-09-16)
EtherLink/2 User Manual
Configuring EtherLink/2
•
1-21