Ashton RHYTHMVX, User Manual

Page: 7 / 28

PAGE 7
ASSEMBLY
1. OPEN THE STAND:
i) Tear off the adhesive
tape on the stand.
ii) Loosen the wing-nuts
on the pillars.
iii) Open the stand in the
A/B/C order shown.
iv) Adjust the pillar heights
so that the stand is
steady when assembled.
v) Tighten the wing nuts
on the pillars.
2. ATTACHING THE TOM PADS:
i) Insert the two tom pads
into the side arms.
ii) Use a drum key to
tighten the screw on
the bottom of the
tom pad.
iii) Adjust the height of the
side arms so that it does
not interfere with the
other pads.
iv) Tighten the wing nuts on
the pillars.
SETTING UP THE